Spectra UL633-14 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 31
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
4
LASER SETUP
Position the laser horizontally (tripod mount and rubber feet downward!) on a stable platform, wall mount or
tripod at the desired elevation.
The laser recognizes automatically whether it is used horizontally or vertically when switched on.
Turning On/Off the laser
PressthepowerbuttontoturnOn/Offthelaser.
Note:Dependingonthesetup(horizontalorvertical)andifagradevaluehasbeendialedin,theunitstarts
thetemperature/referencecheckwhilethethermometersymbolisashing.
Whenthetemperature/referencecheckhasbeennished,thestandarddisplayappearsandthebubblesymbols
ashuntilself-levelinghasbeencompleted.
Iftheself-levelingcan’tbenishedbasedontheselectedsensitivity,anerrormessageappears.
AbubblesymbolhelpstoadjusttheunitatthecrossaxiswhensetupverticalforautomaticSpotAlignorin
vertical manual mode.
Features and Functions
Standard Display
TheremotecontrolmirrorsthefunctionalityoftheULkeypad
Button 1: Quickly press and release starts the
MENU entry.
Button 2: Quickly press and release starts the
grade entering mode.
Button 3: Quicklypressandreleaseactivates/
deactivates the manual mode.
Button 4: Quickly press and release to toggle
through the pre-selected rotation
speeds. Press and hold for three
seconds changes the unit into scan
mode.Wheninscanmode,quickly
press and release button 4 toggles
through the pre-selected scan sizes.
Button 5, 8:up/downarrowbuttons.
Button 6, 7:left/rightarrowbuttons.
Button 9: ON/OFFbutton-pressfor1secondto
turnontheunit;pressandholdfor2
seconds to turn off the unit.
Leveling/Standby – LED (green/red)
Batterystatuslaser HIalertfunctionisactivated
Mask
selection BatteryStatusRemoteControl
Status
RadioConnectivity
Rotation
speed/Scanangle
FanBeamisactivated
111560trimble_UL633_01_GB.indd 4 19.01.12 13:24
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Comments to this Manuals

No comments