Spectra UL633-14 User Manual download pdf (Page 15)

4.PressandreleasetheMENUbuttonattheStandardDisplayandselectAxisAlign.

5.Selectthedesiredaxisthenpressbutton4tostartAxisAlign.

Note:Adjusting the receiver into the beam before starting theautomaticAxisAlignmentreduces the time

neededfornishingthealignment.

Selecting the menu icon „View Axis Angle“showsthealignmentangle after an axisalignment has been

completed. This function can be used to measure an angle difference between two direction hubs in a range

uptomax.80°byperformingtwoaxisalignmentsinsequence.

The menu icon „Axis Angle Input“selectionallowstodialinanaxisanglewheretheaxisdirectionwillbe

alignedtooafterarstaxisalignmenthasbeendone.Tworowsareavailablefortypinginaxisanglevalues.

Button5 and 8canbeusedtotogglebetweenbothrows.Changingthesignandnumberscanbedoneusing

the buttons 1 and 2.

Press and release button 4

toconrmtheselectedaxisangles.Theaxeswillbeadjustedwhilethedisplay

fallsbacktothemainMenu.

Press and release button 3(ESC)toexittheAnglefunctions.

Manual Spot Search mode

The Spot Search mode is used for detecting the plumb beam manually using the Spot Finder

SF601andcanbeactivatedinhorizontalandverticalautomaticandmanualmode.

PressandreleasetheMENUbuttonattheStandardDisplayandselectSpotSearch.

Pressing button 4activatesthefanbeamwhiletherotationspeedchangesto900rpmandthe

unit goes back to the standard display.

The4redLEDsaroundthecenterholeguidetheusertotheplumbbeam‘scenterposition-all4LEDson=>

conrmationtheSF601hasbeensettothecorrectcenterposition.

Note:ManualSpotSearchcanalsobeactivatedanytimebyturningontheSpotFinderSF601.

TurningOfftheSF601deactivatestheSpotSearchmodeimmediatelybydeactivatingthefanbeam.

Activating/Deactivating Standby mode

PressandreleasetheMENUbuttonattheStandardDisplayandselectStandby.

Pressing and releasing button 4 activates the Standby mode.

Theself-levelingwillbestoppedandthebeamwillbeturnedoffwhiletheHIalertisstillactive.

ThedisplayshowsthestandbysymbolandtheLevel/StandbyLEDashesredevery5seconds.

To deactivate Standby mode and restore full operation of the laser, press and release button 4.

111560trimble_UL633_01_GB.indd 10 19.01.12 13:24

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

No comments

Spectra UL633-14 User Manual Page 15